Winplus Yada Blind Spot Assist System Spécifications télécharger pdf (Page 9)

Technical Specications

Installation Instructions

Operation Voltage: DC 10-16V

Operation Temperature: -20~70℃

Sensor Horizontal Detection Angle: 120°

IMPORTANT: To ensure proper installation, it is highly

recommended for this unit to be installed by a professional.

These instructions do not apply to all types of vehicles.

They are meant only as a general guide due to the large

number of vehicle makes and models. For vehicle specic

questions, contact your vehicle’s manufacturer.

Consult your local motor vehicle laws on the use of this

product to be sure it is permitted.

WARNING:

• Through installation of the Blind Spot Assist System you

should be sure not to degrade the safety of any system

or device on your vehicle, including Federal Motor Vehicle

Safety Standards.

• Improper installation and wiring of the Blind Spot Assist

System may damage the vehicle’s electrical system,

including vital vehicle computer and operating systems.

That could lead to an accident or re, causing property

damage and/or serious personal injury. It is highly

recommended to seek professional installation advice

from a qualied auto electrician or, in the alternative,

to have the installation performed by a qualied auto

electrician.

Wiring Diagram

Connect power wire (Red)

NOTE: Power wire must be controlled by ignition ON/OFF.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Winplus Yada Blind Spot Assist System Spécifications Page 9