Winplus Yada Blind Spot Assist System Spécifications télécharger pdf (Page 8)

5. SETTINGS AND OPERATION

POWER ON/OFF

• The Dash Monitor will automatically turn ON when it is connected to a power source.

• Hold the power button to turn ON/OFF the unit if necessary.

CONNECTION AND VIEW SELECTION

• The Backup Camera that is included in this System is set as the Default Camera (Camera 1).

When installed as directed by powering through the rear taillights, the rearview image will

automatically appear on the screen during reverse and will remain in standby when the vehicle

is in any other gear or driving forward. If the Camera is powered from another 12V source it will

be constantly powered instead of only when in reverse gear.

• In addition to the Backup Camera, this System can pair with ONE Yada Add-On Camera. The

Yada Add-On Camera is designated Camera 2 when paired to the system. To view, toggle the

Channel Button once to switch camera views and again to see a split view. Keep in mind the

point above regarding view priority

PARKING AID LINE

• You can turn ON/OFF the Parking Aid Line by pressing the Parking Aid Line button when the

reverse image appears on screen.

• You can adjust the parking aid line that appears in your monitor. When the Parking Aid Line is

engaged, press and hold the Parking Aid Line button for 3 seconds, then press the “+” or “-” to

adjust up or down on the monitor. There are a total of 10 adjustments that can be made.

Power

Parking Aid Line / Enter

Down

Channel Button

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Pas de commentaire

Winplus Yada Blind Spot Assist System Spécifications Page 8